Study on Energy Output Characteristics of Explosives Containing B/Al in the Air Blast
X.-L. Li, W. Cao, Q.-G. Song, D.-Y. Gao, B.-H. Zheng, X.-L. Guo, Y. Lu, X.-A. Wang
Institute of Chemical Materials, China Academy of Engineering Physics, Mianyang, Sichuan 621900, P. R. China
Keywords: взрывчатые вещества, содержащие B/Al, воздушный взрыв, численное моделирование, избыточное давление ударной волны, горение, энерговыделение, explosives containing B/Al, air blast, numerical simulation, shock wave overpressure, burning flame, energy output
Abstract
It is a key problem to design and prepare metallized explosives of high energy and low sensitivity. In order to study the effect of the content of the boron/aluminum (B/Al) compound powder on the energy output property of metallized explosives in the air blast, three HMX-based explosives containing B/Al were designed and prepared. Air blast tests of cylindrical samples are performed, accompanied by numerical simulations by the finite element program LS-DYNA. The results show that the shock wave overpressures of explosives containing B/Al are higher than those of explosives containing Al under the same conditions. The deviations between the values calculated by the empirical equation and the measured values are smaller than 3.5 kPa, and the deviations between the values obtained in numerical simulations and the measured values are smaller than 4.9 kPa. Although the Al powder can enter the reaction with detonation products and air easier, the burning time of the boron powder is longer and the released energy is larger. Moreover, as the content of the B/Al compound powder increases, the burning time becomes longer, and the aftereffect work ability and the damage effect become stronger
|
