Publishing House SB RAS:

Publishing House SB RAS:

Address of the Publishing House SB RAS:
Morskoy pr. 2, 630090 Novosibirsk, Russia



Advanced Search

Combustion, Explosion and Shock Waves

2016 year, number 6

Detonation Burning of Anthracite and Lignite Particles in a Flow-Type Radial Combustor

F. A. Bykovskii1, S. A. Zhdan1,2, E. F. Vedernikov1, Yu. A. Zholobov2
1Lavrentyev Institute of Hydrodynamics, Novosibirsk, 630090 Russia
2Novosibirsk State University, Novosibirsk, 630090 Russia
Keywords: непрерывная спиновая детонация, вихревая плоскорадиальная камера сгорания, каменный уголь, структура течения, continuous spin detonation, plane-radial vortex chamber, hard coal, flow structure

Abstract

Regimes of continuous spin detonation of anthracite and lignite particles in an air flow in a radial vortex combustor 500 mm in diameter with a constant (along the radius cross-sectional area are studied. Crushed coal with a particle size of 1-12 μm is used. For transporting coal into the combustor and promoting the chemical reaction on the surface of solid particles, hydrogen or syngas was added in the ratio CO/Н2 = 1/1, 1/2, or 1/3. Continuous spin detonation of two-phase mixtures of fine anthracite and lignite particles and air with addition of hydrogen up to 4% of the coal consumption rate is obtained for the first time. The amount of syngas added to coal increases with decreasing fraction of hydrogen in the syngas: 14, 21, and 27% for anthracite and 11, 20, and 29% for lignite at СО/Н2 = 1/3, 1/2, and 1/1, respectively. The detonation wave structure and the flow in their vicinity are not principally different from those observed previously for long-flame hard coal and charcoal. Higher detonation velocities are observed for more energy-intensive coal (anthracite). A higher pressure is obtained near the cylindrical wall of the combustor in cold runs as compared to detonation in the case with identical flow rates of the coal-air mixtures.

DOI: 10.1134/S0010508216060101