EFFECT OF NANOPARTICLES ON THE STRUCTURE AND PROPERTIES OF AN ALUMINUM ALLOY POURED INTO A MOULD WITH THE USE OF A MAGNETOHYDRODYNAMIC DISK PUMP
S. S. Katsnelson, G. A. Pozdnyakov, A. N. Cherepanov
Khristianovich Institute of Theoretical and Applied Mechanics, Siberian Branch, Russian Academy of Sciences, Novosibirsk, 630090 Russia
savelii@itam.nsc.ru
Keywords: расплав металла, магнитогидродинамический насос, наномодификаторы, структуралитыхсплавов, metal melt, magnetohydrodynamic pump, nanomodifiers, structure of cast alloys
Abstract
The influence of two nanomodifiers with different compositions during their homogenization in the AL7 aluminum melt and moulding on the properties of the modified aluminum alloy is studied. Experiments are performed with the use of a centrifugal conductive magnetohydrodynamic pump. The melt is poured into a graphite mould with three cylindrical channels 38 mm in diameter and 160 mm long, which are designed for a metal mass of 500g. Two compositions are used as modifying agents: nano-scale particles of the aluminum nitride powder 40--100nm in size and metallized carbon nanotubes smaller than 25 nm, which are clad with aluminum to improve wetting of their surface. The analysis of the structure of the experimental and reference samples shows that the use of modifiers leads to refinement of the grain structure of the cast metal. According to the Hall--Petch theory, this effect may result in improvement of mechanical characteristics of the cast metal.
|
